{"title":"HYDRO DIPPING ACTIVATOR","description":"\u003ch2\u003eHydro dipping activator\u003c\/h2\u003e\u003cp\u003eThe activator is the product that dissolves the polyvinyl layer of the film and gets the ink ready to wrap around the part. Here you have it in every format: a 400 ml spray can for small jobs, and 500 ml and 1 litre bottles, a 5 litre drum and a 25 litre drum for workshops and production.\u003c\/p\u003e\u003cp\u003eOur activator covers up to 20 square metres per litre, so it works out very cheap per part. It is applied in a single pass at 20-25 cm, with the water at around 25 degrees, and each product page shows the recommended hydration time for the film. The best-selling format is the \u003ca href=\"\/en-gb\/products\/activador-hidroimpresion-spray-400-ml\"\u003e400 ml activator spray\u003c\/a\u003e, because you don't need a spray gun. For bulk activator you normally use a \u003ca href=\"\/en-gb\/collections\/accesorios-de-hidroimpresion\"\u003espray gun with a 1.0 nozzle\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"activador-hidroimpresion-spray-400-ml","title":"Hydro Dipping Activator in a 400 ml aerosol spray can","description":"\u003cp\u003eHydro dipping activator by HYDRA Water Transfer Printing for polyvinyl alcohol films, in a 400 ml aerosol spray can.\u003c\/p\u003e\u003cp\u003eThe activator is the key to success in hydro dipping and in every dip. Our formula is specially designed to respect colours and offer good flexibility, keeping discolouration, film stretching and distortion to a minimum and, to a lesser extent, bubbles and other defects, thanks to the surface tension its components give it.\u003c\/p\u003e\u003cp\u003eCoverage: 8 m² per can.\u003c\/p\u003e\u003cp\u003eSpray application, in a single step. The can comes already set for pressure, flow and fan:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHold the can horizontally.\u003c\/li\u003e\n\u003cli\u003eApplication distance: 20-25 cm.\u003c\/li\u003e\n\u003cli\u003eOne pass every 10-15 cm.\u003c\/li\u003e\n\u003cli\u003eWait until the film is completely liquid, then dip the part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRecommended temperature: 25 ºC.\u003c\/p\u003e\u003cp\u003eRecommended hydration time (from placing the film on the water to applying the activator): 90 seconds.\u003c\/p\u003e\u003cp\u003eApply just the amount needed to liquefy the film, no more and no less. Before dipping the part, check that the film has liquefied properly.\u003c\/p\u003e","brand":"HYDRA WATER TRANSFER PRINTING","offers":[{"title":"Default Title","offer_id":35817187803304,"sku":"8435476400016","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/2279\/4152\/products\/AEROSOL-400-ml-EBAY-1_03b895fc-ec06-4083-9d5d-dc87c34c7797.jpg?v=1599668315"},{"product_id":"activador-hidroimpresion-1-litro","title":"Hydro Dipping Activator in a 1 litre bottle","description":"\u003cp\u003eHydro dipping activator by HYDRA Water Transfer Printing for polyvinyl alcohol films, in a 1 litre bottle, for spray gun application.\u003c\/p\u003e\u003cp\u003eThe activator is the key to success in hydro dipping and in every dip. Our formula is specially designed to respect colours and offer good flexibility, keeping discolouration, film stretching and distortion to a minimum and, to a lesser extent, bubbles and other defects, thanks to the surface tension its components give it.\u003c\/p\u003e\u003cp\u003eCoverage: 25 m² per litre.\u003c\/p\u003e\u003cp\u003eSpray gun application, in a single step:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePressure of 0.6-0.7 bar.\u003c\/li\u003e\n\u003cli\u003eFan fully open and flow at maximum.\u003c\/li\u003e\n\u003cli\u003e1.2 or 1.3 nozzle.\u003c\/li\u003e\n\u003cli\u003eApplication distance: 25-30 cm.\u003c\/li\u003e\n\u003cli\u003eOne pass roughly every 15 cm.\u003c\/li\u003e\n\u003cli\u003eWait until the film is completely liquid, then dip the part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRecommended temperature: 25 ºC.\u003c\/p\u003e\u003cp\u003eRecommended hydration time (from placing the film on the water to applying the activator): 90 seconds.\u003c\/p\u003e\u003cp\u003eApply just the amount needed to liquefy the film, no more and no less. Before dipping the part, check that the film has liquefied properly.\u003c\/p\u003e\u003cp\u003eApplying it with a mister, trigger sprayer or hand sprayer is not recommended, as this is a high-performance activator.\u003c\/p\u003e","brand":"HYDRA WATER TRANSFER PRINTING","offers":[{"title":"Default Title","offer_id":35817187836072,"sku":"8435476400023","price":27.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/2279\/4152\/products\/BOTE-1-LITRO-EBAY_2f498518-eb8c-4f73-bc9e-8670a1d3133e.jpg?v=1597842808"},{"product_id":"activador-hidroimpresion-garrafa-de-5-litros","title":"Hydro Dipping Activator in a 5 litre drum","description":"\u003cp\u003eHydro dipping activator by HYDRA Water Transfer Printing for polyvinyl alcohol films, in a 5 litre drum, for spray gun application.\u003c\/p\u003e\u003cp\u003eThe activator is the key to success in hydro dipping and in every dip. Our formula is specially designed to respect colours and offer good flexibility, keeping discolouration, film stretching and distortion to a minimum and, to a lesser extent, bubbles and other defects, thanks to the surface tension its components give it.\u003c\/p\u003e\u003cp\u003eCoverage: 125 m² (25 m² per litre).\u003c\/p\u003e\u003cp\u003eSpray gun application, in a single step:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePressure of 0.6-0.7 bar.\u003c\/li\u003e\n\u003cli\u003eFan fully open and flow at maximum.\u003c\/li\u003e\n\u003cli\u003e1.2 or 1.3 nozzle.\u003c\/li\u003e\n\u003cli\u003eApplication distance: 25-30 cm.\u003c\/li\u003e\n\u003cli\u003eOne pass roughly every 15 cm.\u003c\/li\u003e\n\u003cli\u003eWait until the film is completely liquid, then dip the part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRecommended temperature: 25 ºC.\u003c\/p\u003e\u003cp\u003eRecommended hydration time (from placing the film on the water to applying the activator): 90 seconds.\u003c\/p\u003e\u003cp\u003eApply just the amount needed to liquefy the film, no more and no less. Before dipping the part, check that the film has liquefied properly.\u003c\/p\u003e\u003cp\u003eApplying it with a mister, trigger sprayer or hand sprayer is not recommended, as this is a high-performance activator.\u003c\/p\u003e","brand":"HYDRA WATER TRANSFER PRINTING","offers":[{"title":"Default Title","offer_id":35817187868840,"sku":"8435476400030","price":139.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/2279\/4152\/products\/GARRAFA-5-LITROS-EBAY.jpg?v=1607095627"},{"product_id":"activador-hidroimpresion-garrafa-de-25-litros","title":"Hydro Dipping Activator in a 25 litre drum","description":"\u003cp\u003eHydro dipping activator by HYDRA Water Transfer Printing for polyvinyl alcohol films, in a 25 litre drum, for spray gun application.\u003c\/p\u003e\u003cp\u003eThe activator is the key to success in hydro dipping and in every dip. Our formula is specially designed to respect colours and offer good flexibility, keeping discolouration, film stretching and distortion to a minimum and, to a lesser extent, bubbles and other defects, thanks to the surface tension its components give it.\u003c\/p\u003e\u003cp\u003eCoverage: 625 m² (25 m² per litre).\u003c\/p\u003e\u003cp\u003eSpray gun application, in a single step:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePressure of 0.6-0.7 bar.\u003c\/li\u003e\n\u003cli\u003eFan fully open and flow at maximum.\u003c\/li\u003e\n\u003cli\u003e1.2 or 1.3 nozzle.\u003c\/li\u003e\n\u003cli\u003eApplication distance: 25-30 cm.\u003c\/li\u003e\n\u003cli\u003eOne pass roughly every 15 cm.\u003c\/li\u003e\n\u003cli\u003eWait until the film is completely liquid, then dip the part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRecommended temperature: 25 ºC.\u003c\/p\u003e\u003cp\u003eRecommended hydration time (from placing the film on the water to applying the activator): 90 seconds.\u003c\/p\u003e\u003cp\u003eApply just the amount needed to liquefy the film, no more and no less. Before dipping the part, check that the film has liquefied properly.\u003c\/p\u003e\u003cp\u003eApplying it with a mister, trigger sprayer or hand sprayer is not recommended, as this is a high-performance activator.\u003c\/p\u003e","brand":"HYDRA WATER TRANSFER PRINTING","offers":[{"title":"Default Title","offer_id":35817187934376,"sku":"8435476411340","price":459.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/2279\/4152\/products\/GARRAFA25LITROSEBAY.jpg?v=1600353172"},{"product_id":"activador-hidroimpresion-500-ml","title":"Hydro Dipping Activator in a 500 ml bottle","description":"\u003cp\u003eHydro dipping activator by HYDRA Water Transfer Printing for polyvinyl alcohol films, in a 500 ml bottle, for spray gun application.\u003c\/p\u003e\u003cp\u003eThe activator is the key to success in hydro dipping and in every dip. Our formula is specially designed to respect colours and offer good flexibility, keeping discolouration, film stretching and distortion to a minimum and, to a lesser extent, bubbles and other defects, thanks to the surface tension its components give it.\u003c\/p\u003e\u003cp\u003eCoverage: 12.5 m² (25 m² per litre).\u003c\/p\u003e\u003cp\u003eSpray gun application, in a single step:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePressure of 0.6-0.7 bar.\u003c\/li\u003e\n\u003cli\u003eFan fully open and flow at maximum.\u003c\/li\u003e\n\u003cli\u003e1.2 or 1.3 nozzle.\u003c\/li\u003e\n\u003cli\u003eApplication distance: 25-30 cm.\u003c\/li\u003e\n\u003cli\u003eOne pass roughly every 15 cm.\u003c\/li\u003e\n\u003cli\u003eWait until the film is completely liquid, then dip the part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRecommended temperature: 25 ºC.\u003c\/p\u003e\u003cp\u003eRecommended hydration time (from placing the film on the water to applying the activator): 90 seconds.\u003c\/p\u003e\u003cp\u003eApply just the amount needed to liquefy the film, no more and no less. Before dipping the part, check that the film has liquefied properly.\u003c\/p\u003e\u003cp\u003eApplying it with a mister, trigger sprayer or hand sprayer is not recommended, as this is a high-performance activator.\u003c\/p\u003e","brand":"HYDRA WATER TRANSFER PRINTING","offers":[{"title":"Default Title","offer_id":35817197338792,"sku":"8435476411371","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/2279\/4152\/products\/BOTE-1-LITRO-EBAY_5055a738-07a8-483e-82de-188a31117642.jpg?v=1600353079"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/2279\/4152\/collections\/AEROSOL_400_ml_EBAY_76e67d12-d0cf-4a13-a61c-ea534348d147.jpg?v=1597858969","url":"https:\/\/hydrawtp.com\/en-ie\/collections\/hydro-dipping-activator.oembed","provider":"HYDRA WATER TRANSFER PRINTING","version":"1.0","type":"link"}